6/20/2023 0 Comments Download transistor circuit![]() ![]() There is a connection between the sizes of the two currents. When a current flows from the base to the emitter, the transistor turns on so that a larger current can flow from the collector to the emitter. To choose the component values, there’s one more thing you need to know about how transistors work: ![]() If you also add a pushbutton, you can control the transistor, and thereby the LED, ON and OFF with a button: Choosing Component Values This is the same principle you use to limit the current through an LED to make sure it doesn’t blow up. ![]() So you’ll automatically get around 0.7V by adding a resistor. If you add a resistor in series, the rest of the voltage drops across the resistor. A diode has a forward voltage that it “grabs” from the available voltage. Since most of us don’t have a 0.7V battery, how do we turn on the transistor?Įasy! The base-to-emitter part of a transistor works like a diode. If you had a 0.7V battery, you could have connected it between the base and emitter, and the transistor would have turned ON. To turn the transistor ON, you need a voltage of about 0.7V between the base and the emitter. ![]()
0 Comments
Leave a Reply. |